Fence Calculator

Updated How we calculate2 sources

With posts every 8 ft and one 4 ft gate, a 100 ft privacy fence 6 ft tall takes 14 posts and 56 bags of 50 lb fast-setting concrete. Your own length, height, gates and corners go in the form below.

0 for a privacy fence.
Auto = half the height (Quikrete rule).
0 posts
Fast-setting concrete (50 lb)0
Pickets0
Rails0
Post length0
Hole size0
Gravel for hole bottoms0

Quick answers

How to use the fence calculator

  1. Measure the full fence line in feet, including gate openings. For several separate runs, add them up and count each extra run end as a corner.
  2. Choose post spacing, 6 or 8 ft. If you're using 8 ft rails, set posts every 8 ft so each rail spans one section.
  3. Leave the post depth on Auto to follow Quikrete's rule, or enter the depth your local code or frost line requires.

The formulas

Sections = (fence length − gate widths) ÷ post spacing, rounded up. Posts = sections + 1 + gates + corners.

Following Quikrete, each hole is 3 × post width across and post depth + 6 in deep, with 6 in of gravel at the bottom. Concrete fills the hole around the post up to 3 in below the ground, which is left for soil or sod. Bags = concrete volume ÷ 0.375 cu ft per 50 lb bag, rounded up per post. The concrete per fence post table has that worked out for common post sizes and depths.

Pickets = fence length in inches ÷ (picket width + gap), rounded up.

Worked example: 100 ft of 6 ft privacy fence with one gate

100 − 4 ft gate = 96 ft of fence ÷ 8 ft = 12 sections, so 13 posts plus 1 for the gate = 14 posts. Quikrete's rule puts 36 in of each 4 × 4 in the ground, so use 9 ft posts in 10.5 in holes, 42 in deep. Concrete per post: about 1.42 cu ft, so 4 bags per post, 56 bags in total. Pickets: 1,152 in ÷ 5.5 = 210. Rails: 12 sections × 3 = 36.

Bags of fast-setting concrete per post

50 lb bags, hole 3 times the post width, top 3 in left for soil.

Post depth in ground4 × 4 post (10.5 in hole)6 × 6 post (16.5 in hole)
24 in3 bags6 bags
30 in4 bags8 bags
36 in4 bags10 bags

Before you dig, call 811 (in the US) so buried utility lines are marked. It's free.

Save this example

The worked example as a card you can save to Pinterest or print.

How many posts and bags of concrete for a 100 ft fence? 14 posts, 56 bags. 6 ft privacy fence, posts 8 ft apart, one 4 ft gate. 4 bags of 50 lb fast-setting concrete per post. 210 pickets and 36 rails.

Common questions

How many posts do I need for a 100 ft fence?

With posts every 8 ft and no gate, 100 ft is 12.5 sections, which rounds up to 13 sections and 14 posts. A gate changes the math a little. The calculator takes the gate width off the length first, then adds one post per gate, since a gate needs a post on both sides. One 4 ft gate leaves 96 ft, which is 12 sections, so you still end up with 14 posts. Every corner you enter adds one more post.

How deep should fence posts be?

Quikrete's rule is 1/3 of the post's total length, which works out to half the height above ground. A 6 ft fence then has 3 ft in the ground and uses 9 ft posts. In cold climates, go below the frost line your local building department lists, and always call 811 before you dig. Our fence post depth guide compares Quikrete with the frost-line rules.

How many bags of concrete per fence post?

Quikrete says two 50 lb bags of Fast-Setting Concrete set a 3 in post in a 9 in hole 30 in deep. For a standard 4 × 4 (3.5 in actual) in a 10.5 in hole, plan on about 3 bags at 24 in deep and 4 bags at 36 in deep. A 6 × 6 post in a 16.5 in hole takes two to two and a half times as much.

How many pickets do I need?

Divide the fence length in inches by the picket width plus the gap. For 100 ft of privacy fence with 5.5 in pickets and no gap: 1,200 ÷ 5.5 = 219 pickets. With a 1.5 in gap: 1,200 ÷ 7 = 172.

How many rails per section?

The calculator defaults to 3 rails per section, and you can switch it to 2 or 4. Check your local code or HOA rules, and the fence panel maker's instructions if you use panels.

Fence guides

Guides and posts for this project

Related calculators

Sources

  1. Quikrete: setting posts (hole size and depth)
  2. Quikrete Fast-Setting Concrete Mix No. 1004 data sheet

See how we calculate.