In a 12 × 12 ft room with 8 ft walls, the walls and ceiling take 19 sheets of 4 × 8 drywall, 10% extra included. Put in your room size or total area for sheets, joint compound and screws.
Quick answers
A 4 × 8 sheet covers 32 sq ft, a 4 × 10 covers 40 sq ft and a 4 × 12 covers 48 sq ft. Divide your wall and ceiling area by the sheet area, add 10% for cuts, and round up.
Joint compound: about 10 gallons per 1,000 sq ft of drywall (USG Sheetrock All Purpose).
Screws go every 16 in on walls and 12 in on ceilings over wood framing (USG). At that spacing the calculator counts about 28 screws per 4 × 8 sheet on a wall.
How to use the drywall calculator
Measure each room's length, width and wall height, or enter the wall and ceiling area directly.
Pick the sheet size you plan to hang. Longer sheets mean fewer joints but are heavier.
The extra starts at 10%. Go higher if the room has angled walls or a lot of inside and outside corners.
The formula
Sheets = (wall area + ceiling area) × (1 + extra%) ÷ sheet area, rounded up. Wall area is 2 × (length + width) × height and ceiling area is length × width.
Joint compound uses USG's figure of about 10 gallons per 1,000 sq ft. Screws assume framing 16 in on center, with a screw every 16 in along each stud on walls and every 12 in on ceilings, per USG's fastening guidance.
Worked example: a 12 × 12 ft room with 8 ft walls and ceiling
Walls 2 × (12 + 12) × 8 = 384 sq ft, ceiling 144 sq ft, total 528 sq ft. With 10% extra: 580.8 sq ft ÷ 32 = 18.2, which rounds up to 19 sheets of 4 × 8. Joint compound: about 5.3 gallons. Counting wall by wall instead, with no spare, this room takes 17; our drywall sheet guide compares both ways.
Painting the room once it's taped and sanded? Put the same length, width and height into the paint calculator for gallons of wall and ceiling paint.
Sheets for common rooms
8 ft walls plus ceiling, 10% extra.
Room
Total area
4 × 8 sheets
4 × 12 sheets
10 × 10 ft room
420 sq ft
15
10
12 × 12 ft room
528 sq ft
19
13
12 × 16 ft room
640 sq ft
22
15
20 × 20 ft garage
1040 sq ft
36
24
Save this example
The worked example as a card you can save to Pinterest or print.
Common questions
Should I use 4 × 8 or 4 × 12 sheets?
Longer sheets mean fewer seams to tape and finish. They're heavy, though: USG lists its lightweight 1/2 in panels at 1.2 to 1.3 lb per sq ft, so even a lightweight 4 × 12 sheet is about 58 lb (USG) to 70 lb (Georgia-Pacific). A 4 × 8 is easier for one person or a ceiling without a lift. Our drywall weight post lists the sheets brand by brand.
How much drywall mud do I need?
USG puts all-purpose joint compound at about 10 gallons per 1,000 sq ft of panels. A 12 × 12 room with ceiling (528 sq ft) needs roughly 5.3 gallons. Check the pail size and round up.
Do I subtract doors and windows?
Only big ones, like a garage door or a large window. Offcuts from a normal door or window are usually too small to reuse.
The site only keeps what it needs to work, like your light or dark theme. With your OK we'd also count visits and, later, show ads that help keep the calculators free. Those stay off unless you say yes.How we use cookies